Under Sink and Whole House Systems Available
ULTRA-WH-C (City-Water) | Whole-House Fluoride, Radiation, Heavy Metal, Chem and Micro-Sediment Water Filter / Revitalizer
Important: Please ensure this system will fit your place of install before ordering.
Apx. Unit Dimensions: 34″ (Width) x 30″ (Height) x 9″ (Depth)
Installation Preparations Guide: Click Here
The Pure Effect ULTRA-WH is our Latest Advancement for Superior Water Filtration for your entire home. It features our advanced high-capacity/wide-range Radiation & Fluoride removal media: Fluorsorb-WHTM and AntiRad-WHTM, as well as sediment and wide-range chemical reduction capability, so now all the water in your home can be significantly cleaner, more refreshing and pH balanced.
For Drinking Water: Due to heavy metal leeching and buildup inside home piping systems, we highly recommend filtering the water again, directly out of the faucet, using one of our countertop or undercounter systems for drinking. This will create a strong level of redundancy and ensure the freshest water taste and brightness. (Fluoride may be removed near or = to 100% when using our ULTRA and ULTRA-UC drinking water systems in combination with this Whole House System).
PHASE 1: (Chemicals & Sediment) The 1st clear smaller chamber which the water enters contains our Advanced DualCarbTM cartridge with two types of Premium-Grade Activated Carbons (Catalytic & Coconut Shell) evenly mixed together for a superior range of chemical removal. It has a 20 micron sediment removal layer, as well as an Innovative flow design developed to significantly minimize pressure loss. This cartridge has a 250,000 gallon chlorine removal capacity at a 2 gallon/min flow rate (125,000 at 4 gallons/min), and over 10,000 gallons for Chloramine (commonly added hard to remove municipal disinfectant), as well as organic chemicals, rust, silt and sediment. By taking on the onslaught of chemicals and sediment first, this workhorse cartridge helps to take the load off and protect the critical fluoride and radiation removal cartridges that follow, this allows for the next 3 phases to have reduced chemical interference and maximum effectiveness in targeting fluoride, radiation and heavy metals.
PHASE 2: (Radiation & Heavy Metals) As the water reaches the 2nd clear chamber (3 additional phases within itself) it comes in contact with our proprietary AntiRad-WH cartridge, which features, high-performance combination media for wide-range of radioisotope removal, both positively-charged cationic (cesium, strontium, tritium, etc) and negatively-charged anionic (uranium, plutonium, etc) radioisotopes and heavy metals.
PHASE 3 & 4: (Fluoride) Next, the water enters the large 2nd & 3rd blue chambers, which feature our advanced FluorSorb-WHTM calcium substrate & carbon media, and are entirely dedicated to Fluoride Reduction, this is crucial as Fluoride requires sufficient contact time with a sufficient amount of media to be removed from the water. The unique and natural calcium substrate functions as a powerful an-ion exchange medium for removing a large amount of fluoride ions. These two stages are designed to effectively reduce fluoride by over 70%. The cartridges also come with a layer of KDF55 Media, to help discourage bacterial growth and fouling, to improve heavy metal reduction and lower oxidation properties of water.
Connection & Component Quality
Note: Must be installed by a licensed plumber. If you’re not sure whether your current plumbing configuration will allow for installation/connection of this system, we recommend you first contact a Plumber to verify before ordering.
This system features standard 1″ NPT thread female ports which allow you to connect your main cold water service line to the unit. If your service pipe is 3/4″ or 1/2″, we can provide a “reducer” to adapt for your pipe size. The system comes with a dedicated shut-off valve and a built in pressure gauge, which allows you to monitor water pressure to ensure it does not exceed 75PSI (Maximum unit operating pressure) or when it drops significantly (indicating need to change carbon block).
The filter unit body is made of BPA-Free & Phthalate-Free, Precision Machined High-Strength Plastics with a double O-ring rubber seal mechanism. We do not cut corners on quality. By purchasing any of our products, you will also be supporting the US economy, workers and our company.
*If you do not have Fluoride in your water supply, our fluoride reduction cartridges are carbon/calcium based and will still serve a very effective purpose for wide-range chemical removal.
Filter Replacement: Every 4-12 months (Dependent upon # of people in household). See cartridges.
Maintenance Cost: Apx. $79/Month (based on annual filter replacement cost for a 4 member household).
Installation Instructions: Click here
Apx. Unit Dimensions: 34″ (Width) x 30″ (Height) x 9.5″ (Depth)
Shipping Weight: 70lbs
Operating Weight: 120lbs+ (when filled with water).
Max Flow Rate: Apx. 10 Gallons Per Minute. Max PSI: 80
Warranty: 2 Years
*Contaminant removal % based upon internal and/or independent laboratory water analysis. Individual results may vary. **Our filter systems are designed to be used only with water that is approved for drinking by the local, state and/or federal regulations.