Thank you for ordering your JIVARA UNDER SINK from The Wellness Enterprise, Inc. We are here to support you.
Below is the Jivara Under Sink Device. There are two most common ways to install your Jivara Under Sink.
Installing on the Cold Water Line
The pieces in the photo below are all you will need to install the Jivara under sink on a cold water line. Water can flow in either direction with 100% effectiveness so you can connect to either end. Simply turn off your water, disconnect the braided hose between your water supply and the cold water portion of your faucet. Apply plumbers tape as needed.
Connect the fat threaded bottom of the device to the part where your braided hose was just connected. Insert the ⅜”s to ⅜”s nipple into the top of the device. Reconnect your braided hose to the top of the nipple. Again, apply plumber’s tape as needed. Turn on water slowly and look for leaks and tighten the appropriate connections as necessary. We recommend using a licensed plumber for your installation and many people choose to install the Jivara under sink themselves anyway.
Installing After a Water Filter
Quick connect fittings that are adaptable to ¼” and ⅜” flexible tubing are included with your order. To install the under sink device on a flexible tube, begin by inserting the two green washers pictured below into the ends of the under sink device. Next, screw in the quick connects.
Notice the quick connects have two parts that can be separated to adapt for ¼” or ⅜” tubing.
Once complete simply cut your flexible tube and insert the ends into the quick connects.
Installing the Jivara Under Sink with the Jivara Remineralizer
For those who order the Jivara Remineralizer use the piece pictured below to connect the Remineralizer directly to the Jivara Under Sink. Use plumber’s tape as appropriate.